Method for Determining the Normal Times of Machine-Hand Suboperation in Sewing Seams with Two Radii of Curvature (CROSBI ID 567745)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Firšt Rogale, Snježana ; Rogale, Dubravko ; Dragčević, Zvonko
engleski
Method for Determining the Normal Times of Machine-Hand Suboperation in Sewing Seams with Two Radii of Curvature
This paper describes the methods for determining the normal times of machine-hand technological suboperations in sewing curved seams with two radii of curvature, based on systematic research and measurements during the performance of machine-hand suboperations in sewing. For that purpose measurements were performed in the laboratory of the Department of Clothing Technology at the Faculty of Textile Technology, University of Zagreb, using modern measurement equipment, as well as the recording technology of the process of sewing clothes in a real production process. After that, the video recordings were analyzed and the times of performing the sewing suboperations were extracted. Based on the measured data a mathematical model and a computer program to calculate relevant parameters in joining work pieces with two radii of curvature BIR were established.
garment technology; normal times; machine-hand suboperations; curved seam; mathematical model
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
0531-0532.
2010.
objavljeno
Podaci o matičnoj publikaciji
Katalinić, Branko
Beč: DAAAM International Vienna
978-3-901-509-73-5
1726-9679
Podaci o skupu
International DAAAM Symposium
predavanje
26.06.2010-28.06.2010
Zadar, Hrvatska