Examination of welding parameters influence on Stud Arc Welding process (CROSBI ID 568420)
Prilog sa skupa u zborniku | sažetak izlaganja sa skupa | međunarodna recenzija
Podaci o odgovornosti
Klarić, Štefanija ; Rosandić, Željko ; Milinović, Andrijana
engleski
Examination of welding parameters influence on Stud Arc Welding process
It is well known that the quality of welded joint depends on good selection of welding parameters, and their application during welding process. Also, one can mention, that the stud arc welding process involves the same electrical, mechanical and metallurgical principles as other arc welding processes. As the application of stud welding process is established in many production areas (steam boiler production, bridge construction, automotive and appliance industry), in this paper, the influence of the welding parameters on the weld joint properties at the drawn arc stud welding process with ceramic ferrule is analysed. In the experimental part of the paper, the arc stud welding process is applied with the different welding time and the application of the activating flux for ATIG process (applied with a brush, as a suspension, on the base metal surface). The macrosections of the weld joints welded with different parameters are shown.
arc stud welding; weld characteristics; hardness
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
C:45-C:46.
2010.
objavljeno
Podaci o matičnoj publikaciji
Conference on Engineering research anniversary volume honoring Amalia and Miklos Ivany, Abstracts of the sixth international PhD & DLA symposium
Bachmann Balint, H.
Pečuh: University of Pecs, Pollack Mihaly Faculty of Engineering
978-7298-40-0
Podaci o skupu
Sixth international PhD & DLA symposium
predavanje
25.10.2010-26.10.2010
Pečuh, Mađarska