Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

On the thermomechanical coupling in finite strain plasticity theory with non-linear kinematic hardening by means of incremental energy minimization (CROSBI ID 168514)

Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija

Čanađija, Marko ; Mosler, Jörn On the thermomechanical coupling in finite strain plasticity theory with non-linear kinematic hardening by means of incremental energy minimization // International journal of solids and structures, 48 (2011), 7/8; 1120-1129. doi: 10.1016/j.ijsolstr.2010.12.018

Podaci o odgovornosti

Čanađija, Marko ; Mosler, Jörn

engleski

On the thermomechanical coupling in finite strain plasticity theory with non-linear kinematic hardening by means of incremental energy minimization

The thermomechanical coupling in finite strain plasticity theory with non-linear kinematic hardening is analyzed within the present paper. This coupling is of utmost importance in many applications, e.g., in those showing low cycle fatigue (LCF) under large strain amplitudes. Since the by now classical thermomechanical coupling originally proposed by Taylor & Quinney cannot be used directly in case of kinematic hardening, the change in heat as a result of plastic deformation is computed by applying the first law of thermodynamics. Based on this balance law, together with a finite strain plasticity model, a novel variationally consistent method is elaborated. Within this method and following Stainier & Ortiz [1], all unknown variables are jointly and conveniently computed by minimizing an incrementally defined potential. In sharp contrast to previously published works, the evolution equations are a priori enforced by employing a suitable parameterization of the flow rule and the evolution equations. The advantages of this parameterization are, at least, twofold. First, it leads eventually to an unconstrained stationarity problem which can be directly applied to any yield function being positively homogeneous of degree one, i.e., the approach shows a broad range of application. Secondly, the parameterization provides enough flexibility even for a broad range of non-associative models such as kinematic hardening of Armstrong-Frederick-type. Different to [1], the continuous variational problem is approximated by a standard, fully-implicit time integration. The applicability of the resulting numerical implementation is finally demonstrated by analyzing the thermodynamically coupled response for a loading cycle.

thermoplasticity; energy minimization; variational consistent updates; kinematic hardening

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

48 (7/8)

2011.

1120-1129

objavljeno

0020-7683

10.1016/j.ijsolstr.2010.12.018

Povezanost rada

Strojarstvo, Temeljne tehničke znanosti

Poveznice
Indeksiranost