Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

CAD Modelling of the Optimal Axial-radial Impeller of the Centrifugal Compressor for CAM (CROSBI ID 476183)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Guzović, Zvonimir ; Matijavević, Branimir ; Novko, Igor CAD Modelling of the Optimal Axial-radial Impeller of the Centrifugal Compressor for CAM / Katalinic, B. (ur.). Beč: Danube Adria Association for Automation & Manufacturing, 1999. str. 175-176-x

Podaci o odgovornosti

Guzović, Zvonimir ; Matijavević, Branimir ; Novko, Igor

engleski

CAD Modelling of the Optimal Axial-radial Impeller of the Centrifugal Compressor for CAM

The paper presents the problem of the optimal design of axial-radial impeller in a centrifugal compressor, simultaneously satisfying the demands of aerodynamics, strength and technology. In the literature, there are several engineering analytic-graphic methods for the design and checking of the geometry of the axial-radial impeller. By usin adequate CAD application software and numerical modelling, one of these is automated and the results of the design are given in the paper. The set algorithm is intended for CAM.

centrifugal compressor; impeller; optimal geometry; automated design

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

175-176-x.

1999.

objavljeno

Podaci o matičnoj publikaciji

Katalinic, B.

Beč: Danube Adria Association for Automation & Manufacturing

Podaci o skupu

The 10th International DAAAM Symposium "Intelligent Manufacturing & Automation: Past-Present-Future"

predavanje

21.10.1999-23.10.1999

Beč, Austrija

Povezanost rada

nije evidentirano