MACHINING OF DUPLEX STEEL IN IMPELLER PRODUCTION (CROSBI ID 573621)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Stoić, Antun ; Kopač, Janez ; Samardžić, Ivan ; Duspara, Miroslav ; Tadijanović, Adam
engleski
MACHINING OF DUPLEX STEEL IN IMPELLER PRODUCTION
This paper gives an overview of the machining technology applied in impeller production. The complex geometry of the impeller (thin walls combined with interrupt cutting condition) and the tolerance demands make this production challenging. Raw material was casted duplex steel X2CrNiMoN 26 7 4 (W.Nr. 1.4469) with high content of Mo. During the casting process of duplex steel it is necessary to ensure high purity of melts, as well as a small scattering of alloying elements. The problem facing this production was impurity (sand) on the impeller blades. Before the machining, the impurity has to be removed by milling or grinding and after that filled with welding technology. TIG process, with wire thickness of Φ=2.4mm was performed. Before welding it is necessary preheat the material up to 120-150 ˚C.
Impeller; duplex steel; TIG process; milling
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
237-240.
2011.
objavljeno
Podaci o matičnoj publikaciji
Computer integrated manufacturing and high speed machining
Abele, Eberhard ; Udiljak, Toma ; Ciglar, Damir
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS)
978-953-7689-01-8
Podaci o skupu
CIM 2011
predavanje
16.06.2011-18.06.2011
Biograd na Moru, Hrvatska