Mathematical Modelling And Minimization Of Deep Drawing Force With Thickness Reduction (CROSBI ID 477948)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Jurković, Zoran ; Jurković, Milan
engleski
Mathematical Modelling And Minimization Of Deep Drawing Force With Thickness Reduction
The mathematical modelling of deep drawing force with wall thickness reduction is performed by applying the upper bound method. Basic parameters of modelling are: deformation degree, tool working zone geometry, plastic flow angle and contact friction. The purpose of drawing force modelling is minimization of tool loading with the aim of increasing tool life and productivity of the machining system. By applaying minimization of deep drawing force tool life may be increased by more than 40%, which is the main aim of this paper.
Mathematical Modelling; Deep Drawing; Thickness Reduction; Drawing Force Minimization
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
2143-2148-x.
1999.
objavljeno
Podaci o matičnoj publikaciji
Podaci o skupu
ICTP 1999-Advanced Technology Of Plasticity
predavanje
19.09.1999-24.09.1999
Nürnberg, Njemačka