Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

Effect of EPDM as a compatibilizer on mechanical properties and morphology of PP/LDPE blends (CROSBI ID 185357)

Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija

Vranješ Penava, Nina ; Rek, Vesna ; Fiamengo Houra, Ivona Effect of EPDM as a compatibilizer on mechanical properties and morphology of PP/LDPE blends // Journal of elastomers and plastics, 45 (2013), 4; 391-403. doi: 10.1177/0095244312457162

Podaci o odgovornosti

Vranješ Penava, Nina ; Rek, Vesna ; Fiamengo Houra, Ivona

engleski

Effect of EPDM as a compatibilizer on mechanical properties and morphology of PP/LDPE blends

Blends of polypropylene (PP) and low-density polyethylene (LDPE) with and without ethylene-propylene-diene (EPDM) terpolymer as a compatibilizer were studied. Mechanical properties were chosen to estimate the compatibilization efficiency of EPDM. The interactions between phases were valued through glass transition shifts in dynamic mechanical spectra, and morphology of the blends was obtained using scanning electron microscopy. Interfacial adhesion was improved by EPDM addition. Addition of EPDM to PP/LDPE blends improved mechanical properties, especially Izod impact strength in LDPE-rich blends and with higher EPDM content.

blends; compatibilization; morphology; mechanical properties; dynamic mechanical analysis

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

45 (4)

2013.

391-403

objavljeno

0095-2443

10.1177/0095244312457162

Povezanost rada

Kemijsko inženjerstvo

Poveznice
Indeksiranost