Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

THE OPTIMIZATION OF CRANKSHAFT OFFSET OF SPARK IGNITION ENGINE (CROSBI ID 589546)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Tomić, Rudolf ; Sjerić, Momir ; Lulić, Zoran THE OPTIMIZATION OF CRANKSHAFT OFFSET OF SPARK IGNITION ENGINE // TMT 2012 Proceedings, "Trends in Development of Machinery and Associated Technology" / Ekinović, S. ; Yalcin, S. ; Vivancos, J. (ur.). Zenica, 2012. str. 527-530

Podaci o odgovornosti

Tomić, Rudolf ; Sjerić, Momir ; Lulić, Zoran

engleski

THE OPTIMIZATION OF CRANKSHAFT OFFSET OF SPARK IGNITION ENGINE

The paper presents influence of the crankshaft offset of spark ignition engine regarding the engine friction, torque and power. It is known from the literature that crankshaft offset has a potential to reduce normal piston force during the expansion stroke at lower engine speeds. The results of lower normal force are reduced mechanical losses due to friction between the piston and liner of the cylinder. The crankshaft offset can significantly change the piston kinematics because the piston moves slower around TDC and BDC. If spark timing is referenced to the piston position from the TDC, the crankshaft offset increase in-cylinder pressure during the combustion as a result of lower change of the cylinder volume close to the TDC and engine performances can be improved. Two operating points of spark ignition engine were analyzed and optimization of crankshaft offset was performed by the NSGA-II genetic algorithm. In order to calculate the active piston force during the combustion process Vibe function were applied. The minimization of friction losses that occur between piston and cylinder liner as well as minimization of difference between peak values of resultant force of the piston in the normal direction were the main objectives of the optimization. The optimization results show that crankshaft offset has potential to improve engine performances at lower engine speeds.

internal combustion engines; crankshaft offset; optimization; engine friction; genetic algorithm

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

527-530.

2012.

objavljeno

Podaci o matičnoj publikaciji

TMT 2012 Proceedings, "Trends in Development of Machinery and Associated Technology"

Ekinović, S. ; Yalcin, S. ; Vivancos, J.

Zenica:

1840-4944

Podaci o skupu

16th International Research/Expert Conference "Trends in Development of Machinery and Associated Technology"

predavanje

10.09.2012-12.09.2012

Dubai, Ujedinjeni Arapski Emirati

Povezanost rada

Strojarstvo