Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

The Effect of Different Molecular Weight of Soft Segments in Polyurethanes on Photooxidative Stability (CROSBI ID 78875)

Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija

Govorčin-Bajsić, Emi ; Rek, Vesna ; Sendijarević, Aiša ; Sendijarević, Vahid ; Frisch, K.C. The Effect of Different Molecular Weight of Soft Segments in Polyurethanes on Photooxidative Stability // Polymer degradation and stability, 52 (1996), 223-233-x

Podaci o odgovornosti

Govorčin-Bajsić, Emi ; Rek, Vesna ; Sendijarević, Aiša ; Sendijarević, Vahid ; Frisch, K.C.

engleski

The Effect of Different Molecular Weight of Soft Segments in Polyurethanes on Photooxidative Stability

The effect of molecular weight of polyol (soft segment) and the concentration of urethane (hard segment) in segmented polyurethane elastomers on their photodegradation was investigated. Polyurethane elastomers have been prepared from 4, 4"-dipheylmethane diisocyanate (MDI) and poly (oxytetramethylene)glycol (PTMO) of 1000 and 2000 molecular weight at NCO/OH ratios of 2/1 and 4/1. Purified 1, 4-butandiol (BD) was used as the chain extender. Mechanical, thermal, dynamic mechanical and Fourier Transform Infrared Spectroscopy (FTIR) measurements have been used for mechanical and structural studies of PUR elastomers before and after UV irradiation, for a better understanding of the role of the concentration of hard segments (urethane) and molecular weight of soft segments (polyol) in PUR. It was found that the molecular weight of soft segments as well as the NCO/OH ratios have an influence on the UV stability of the examined elastomers. The photooxidative degradation is more prevalent in elastomers with lower hard segment concentration and with higher soft segment molecular weight. The correlation between the compositions of the investigated elastomers and mechanical properties, dynamic mechanical properties, physical transitions, as well as intensities of the changes these properties after irradiation were established. The results show that with an increase of hard segment concentration in all examined polyurethane elastomers, the glass transition temperature (T_g) of the soft segment increased, the tensile strength increased and the elongation at break decreased. In irradiated polyurethane elastomers based on PTMO (1000) with the higher hard segment concentration T_g of the soft segment decreased, the opposite effect was obtained in PUR elastomer with lower hard segment concentration. Resistance to photooxidative degradation was enhanced with increase of the hard segment concentration in polyurethane elastomers based on PTMO (1000). The photooxidative degradation is more prevalent in polyurethane elastomers based on polyether with higher molecular weight PTMO (2000), than those based on polyether of molecular weight PTMO (1000), even at higher hard segment concentration.

Hard segment; mechanical and structural studies; molecular weight; photodegradation; polyurethane elastomers; soft segment; UV-irradiation

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

52

1996.

223-233-x

objavljeno

0141-3910

Povezanost rada

Kemijsko inženjerstvo

Indeksiranost