Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

Sonochemical effectiveness factor (eUS) in the reactors for wastewater treatment by sono-Fenton oxidation : Novel considerations (CROSBI ID 189837)

Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija

Grčić, Ivana ; Papić, Sanja ; Koprivanac, Natalija Sonochemical effectiveness factor (eUS) in the reactors for wastewater treatment by sono-Fenton oxidation : Novel considerations // Ultrasonics sonochemistry, 20 (2013), 4; 1037-1045. doi: 10.1016/j.ultsonch.2012.12.006

Podaci o odgovornosti

Grčić, Ivana ; Papić, Sanja ; Koprivanac, Natalija

engleski

Sonochemical effectiveness factor (eUS) in the reactors for wastewater treatment by sono-Fenton oxidation : Novel considerations

A comprehensive algorithm was recently proposed for calculation of the sonochemical effectiveness factor and wastewater treatment modeling. The presented approach implies that ultrasound is an auxiliary source of free radicals in Fenton type reactions ; introduction of ultrasound represents an enhancement of pollutant degradation rates. The sonochemical effectiveness factor was introduced in kinetic models as the eUS factor (Grčić et al., 2012 [1]). As a substantial follow-up, this study presents novel considerations. The eUS factor was modeled as a function of employed frequency, actual cavitation-related power intensity of ultrasound and a portion of the cavitationally active zone, i.e. dimensionless active volume. The effect of temperature was disregarded in the present model considerations. Cavitationally active zone in reactors was determined based on the erosion of aluminium foil, resulting in cone-shaped space arising from transducer. In the present study, sonochemical treatment of industrial wastewater containing HCOONa as organic pollutant was performed using different equipment: ultrasonic baths (UB1, UB2 and UB3), cylindrical reactor with homogenizer (HCR) and three-frequency hexagonal cell, i.e. ultrasonic pilot reactor prototype (PP). Explored frequency range was from 20 to 120 kHz. Homogeneous and heterogeneous Fenton-type sonochemical processes, US/Fe(II)(FeSO4, aq.)/H2O2 and US/Fe(II)(steel-plate)/H2O2, respectively, applied to industrial wastewater were investigated in terms of mineralization kinetics. Newly modeled eUS factor was introduced in corresponding kinetic models and the overall model was validated. Kinetic parameters of Fenton process were treated as independent of ultrasound, since eUS factor consists of cavitation-related phenomena responsible for the mineralization rate enhancement. In average, a 21% increase of mineralization efficiency was achieved using a single frequency, while more than 70% increase can be achieved by combining 20, 68 and 120 kHz in PP.

sonochemical wastewater treatment; sono-fenton oxidation; ultrasonic pilot reactor; empirical correlation; sonochemical effectiveness factor

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

20 (4)

2013.

1037-1045

objavljeno

1350-4177

10.1016/j.ultsonch.2012.12.006

Povezanost rada

Kemija, Kemijsko inženjerstvo

Poveznice
Indeksiranost