Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

Monitoring of total metal concentration in sludge samples: Case study for the mechanical-biological wastewater treatment plant in Velika Gorica, Croatia (CROSBI ID 189838)

Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija

Filipović, Josip ; Grčić, Ivana ; Bermanec, Vladimir ; Kniewald, Goran Monitoring of total metal concentration in sludge samples: Case study for the mechanical-biological wastewater treatment plant in Velika Gorica, Croatia // Science of the total environment, 447 (2013), 17-24. doi: 10.1016/j.scitotenv.2012.12.078

Podaci o odgovornosti

Filipović, Josip ; Grčić, Ivana ; Bermanec, Vladimir ; Kniewald, Goran

engleski

Monitoring of total metal concentration in sludge samples: Case study for the mechanical-biological wastewater treatment plant in Velika Gorica, Croatia

In this paper, monitoring of total metal concentration in sludge samples from wastewater treatment process is elaborated. The presented results summarize the analyses of sludge samples in a period from 2008 to 2012. Possible sources of pollutions are given. Primarily, waste solid samples were collected from different pretreatment steps: (A) coarse grid, (B) fine grid and (C) aerated sand grease grid. Samples of A and B followed a repeatable pattern in 2008 and 2010. According to the results from 2008, samples of C contained measurable concentration of the following metals (mg/kg dry matter): Zn (21), Ni (1.05) and Ba (14.9). Several types of sludge samples were analyzed: fresh raw sludge (PS ; 6 - 12 hours old), the sludge from the digester for anaerobic sludge treatment (DS ; 48 - 72 hours old), samples from lagoons where the sludge is temporarily deposited (DOS and DOSold ; 30 - 120 days) and sludge samples from agricultural areas (AA ; aged over 180 days). Additionally, samples of dehydrated sludge (DEHS and DEHSold ; 90 - 180 days) were collected upon construction of equipment for sludge dehydration in 2011. Analysis of total metal concentrations for Cu, Zn, Cr, Pb, Ni, Hg, Cd, Ba, As, Se, Sb, Co, Mo, Fe and Mn were performed by flame atomic absorption spectrometry (FAAS) and inductively coupled plasma-optical emission spectrometry (ICP-OES). The most recent results (year 2011) indicated high concentration of heavy metals in PS samples, exceeding the MCLs (mg/kg dry matter): Cu (2122), Zn (5945), Hg (13.67) and Cd (6.29). In 2012 (until July), only concentration of Cu exceeded MCL (928.75 and 1230.5 in DS and DEHS, respectively). Composition of sludge was variable through time, offering the limited possibility for future prediction. The sludge is being considered as a hazardous waste and a subject to discussion regarding disposal.

municipal wastewater ; mechanical -biological treatment ; sewage sludge ; heavy metals ; monitoring

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

447

2013.

17-24

objavljeno

0048-9697

1879-1026

10.1016/j.scitotenv.2012.12.078

Povezanost rada

Geologija, Interdisciplinarne tehničke znanosti, Kemija

Poveznice
Indeksiranost