Coolants quality in-situ tests (CROSBI ID 594426)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Duspara, Miroslav ; Vukušić, Zdravko ; Mijušković, Goran, Stoić, Antun
engleski
Coolants quality in-situ tests
Coolants and lubricants are implemented into the industry production to improve characteristics of the tribological processes that are always present on the contact surfaces of tool and workpiece during machining. Use of these resources increases productivity, improves the surface quality, decrease costs and consequently increases the total profit. In this paper, samples of emulsions from three different companies were collected and two different tests were conducted. The first test is performed with measuring strips and measured the concentration of nitrates, nitrites, water hardness and pH. In the second test with refractometer the emulsion concentrates, emulsions index and temperature of the emulsion were measured. Maximum values of nitrates, nitrites, concentration of emulsion, pHs are shown in this paper. Measuring data that exceed the limit values are additionally observed and recommendations are given.
coolants; quality test; nitrates; nitrites; concentration of emulsion
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
129-135.
2012.
objavljeno
Podaci o matičnoj publikaciji
Sustainable life in manufacturing SLIM 2012
Oguz, Colak ; Kopač, Janez
Istanbul: CAD/CAM research and application center, Laboratory of Cutting
978-9944-452-61-8
Podaci o skupu
SLIM 2012
predavanje
02.09.2012-05.09.2012
Istanbul, Turska