Sol-gel derived mixed metal oxide sorbents for high temperature gas desulfurization (CROSBI ID 192210)
Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Mandić, Vilko ; Očko, Tanja ; Matijašić, Gordana ; Kurajica, Stanislav
engleski
Sol-gel derived mixed metal oxide sorbents for high temperature gas desulfurization
High temperature gas desulfurization (HTGD) is the main process for hydrogen sulphide removal from hot gases. Currently leading regenerable desulfurization sorbents are based on ZnO–TiO2 system. This work presents structural and textural modifications of ZnO–TiO2 based sorbents by Al2O3 addition in order to ensure high temperature mechanical support. Sorbents with composition Zn(2-x)Al2xTi(1-x)O4 (x = 0, 0.25, 0.5, 0.75, 1) were prepared by sol-gel process followed by thermal treatment. Nanocrystalline powders were produced at moderate sintering conditions (500 °C, 2 h). Depending on the initial ZnO:TiO2:Al2O3 molar ratio, zincite (ZnO), brookite (TiO2) as well as gahnite (ZnAl2O4) solid solution were formed. Al2O3 induced textural modifications, rising specific surface area from 34 to 90 m2g-1. The sorbent sulphidation performance was tested using newly developed procedure comprising batch sulphidation process. Sorbent with composition Zn1.75Al0.5Ti0.75O4 was found to possess the highest sulphidation reactivity, i.e. sulphur removal efficiency.
HTGD ; desulfurization ; sorbent ; ZnO–Al2O3–TiO2
Rad je prezentiran na skupu 3rd International Symposium on Environmental Management (SEM2011) Towards Sustainable Technologies, održanom od 26.-28.09.2011.g., Zagreb, Hrvatska.
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o izdanju
Povezanost rada
Kemijsko inženjerstvo, Temeljne tehničke znanosti