Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

Laser induced damage/ablation morphology on the 8(Al/Ti)/Si system in different ambient conditions (CROSBI ID 193681)

Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija

Petrović, Suzana ; Peruško, Davor ; Salatić, B. ; Bogdanović- Radović, Ivančica ; Panjan, P. ; Gaković, Biljana ; Pantelić, D. ; Trtić, M. ; Jelenković, B ; Laser induced damage/ablation morphology on the 8(Al/Ti)/Si system in different ambient conditions // Optics and laser technology, 54 (2013), 22-29. doi: 10.1016/j.optlastec.2013.04.030

Podaci o odgovornosti

Petrović, Suzana ; Peruško, Davor ; Salatić, B. ; Bogdanović- Radović, Ivančica ; Panjan, P. ; Gaković, Biljana ; Pantelić, D. ; Trtić, M. ; Jelenković, B ;

engleski

Laser induced damage/ablation morphology on the 8(Al/Ti)/Si system in different ambient conditions

A study of morphological and composition changes of the (8(Al/Ti)/Si) system induced by laser pulses in different ambient conditions is presented. The effects of an Er, Yb, Cr—Glass laser, operating at 1540 nm wavelength with pulse duration of 44 ns, on a complex target were investigated. Irradiation of 8(Al/Ti)/Si was carried out at intensities of 5.9 and 9.5×1011 W m−2 in air, water and ethanol. The laser-induced morphological and composition modifications have shown dependence on applied intensities, number of laser pulses and ambient conditions. The following morphological changes were observed: (i) intense surface melting of the thin film and Si-substrate ; (ii) ablation/exfoliation of the 8(Al/Ti) multilayer thin film from Si, (iii) appearance of hydrodynamic features such as resolidified material, and (iv) formation of crater at multi-pulse action. The formation of parallel periodic surface structure was only occurring in single pulse air-assisted modification. Analysis of the composition revealed that laser modification induced intermixing between the components of individual Al and Ti layers with potential formation of AlTi intermetallic compounds.

Al/Ti nanolayered thin film; Laser ablation; Inter-mixing

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

54

2013.

22-29

objavljeno

0030-3992

10.1016/j.optlastec.2013.04.030

Povezanost rada

Fizika

Poveznice
Indeksiranost