Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Chemical Processes in Printing Technology (CROSBI ID 197755)

Prilog u časopisu | pregledni rad (znanstveni)

Gojo, Miroslav ; Cigula, Tomislav Chemical Processes in Printing Technology // Glasnik hemičara, tehnologa i ekologa Republike Srpske, VI (2013), 19-23

Podaci o odgovornosti

Gojo, Miroslav ; Cigula, Tomislav

engleski

Chemical Processes in Printing Technology

One of the most commonly used printing technique today is lithography. The printing plate, which is composed of printing (accept printing ink) and nonprinting (must not accept printing ink) areas is highly important factor for all printing processes. Selective ink adsorption on printing plates is usually achieved by geometrical difference between printing and nonprinting areas, but in lithography it is achieved by their different physical-chemical properties. Printing areas are oleophilic (hydrophobic) while nonprinting areas are hydrophilic (oleophobic). In the first step of the printing process, on the printing plate comes fountain solution (water and additives) which is adsorbed only by the nonprinting areas. Printing ink is applied in the second step and it is adsorbed only by the nonprinting areas (not covered with fountain solution). The printing plates are mainly built of aluminium strips that are mechanically, chemically and electrochemically processed in order to make thin and porous film of aluminium oxide (nonprinting areas) and then coated with photoactive layer (printing areas). The plate making process is by aluminium printing plates composed of exposure and developing which remove photoactive layer from nonprinting areas. The aim of this paper is to present the plate making processes and plate parameters’ measuring methods, for example contact angle measurement, determination of the roughness parameters and electrochemical impedance spectroscopy (EIS). In addition, as printing plate-fountain solution interaction is influential for the printing quality, one should define fountain solution’s optimal chemical composition, for what measurements of pH value, electrical conductivity and surface tension are needed.

Graphic technology; printing plate; physical-chemical processes; offset printing

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

VI

2013.

19-23

objavljeno

1840-054X

2232-755X

Povezanost rada

Grafička tehnologija