Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Thermal manifestations and nanoindentation of bone cements for orthopaedic surgery (CROSBI ID 201296)

Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija

Hloch, Sergej ; Monka, Peter ; Hvizdoš, Pavol ; Jakubeczyová, Dagmar ; Kozak, Dražan ; Čolić, Katarina ; Kľoc, Ján ; Magurová, Dagmar Thermal manifestations and nanoindentation of bone cements for orthopaedic surgery // Thermal science, 17 (2013), 1; S251-S258. doi: 10.2298/TSCI130901186H

Podaci o odgovornosti

Hloch, Sergej ; Monka, Peter ; Hvizdoš, Pavol ; Jakubeczyová, Dagmar ; Kozak, Dražan ; Čolić, Katarina ; Kľoc, Ján ; Magurová, Dagmar

engleski

Thermal manifestations and nanoindentation of bone cements for orthopaedic surgery

Improving of bone cements properties is possible by research of variables influencing exothermal behaviour and mechanical properties. Paper deals with exothermal behaviour experimental evaluation of bone cements used for medical purposes. Specimens were prepared by a conventional manual mixing technique. The work addresses primary risk factor associated with application of bone cement to femoral canal. Different size samples of bone cement has been created with diameter d = 2 ; 5 ; 12, 5 mm fixed in dentacryl. As an experimental material, Palacos R+G high viscosity, radiopaque bone cement containing Gentamicin and Radiopaque bone cement Antibiotic Simplex with Tobramycin, was used. Thermal effect during exothermic polymerisation was measured with period 1 minute. Evaluated factors were mass and thickness of bone cement. Significant influence of bone cement mass on temperature has been found.

bone cement; exothermic behaviour; nanoindentation; porosity; osteonecrosis

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

17 (1)

2013.

S251-S258

objavljeno

0354-9836

10.2298/TSCI130901186H

Povezanost rada

Strojarstvo

Poveznice
Indeksiranost