Research on the Dynamics of Milling (CROSBI ID 383572)
Ocjenski rad | doktorska disertacija
Podaci o odgovornosti
Giovanni Totis
Kuljanić, Elso
engleski
Research on the Dynamics of Milling
The development of a chatter detection system for application in industrial conditions was investigated. Several sensors—rotating dynamometer, accelerometers, acoustic emission and electrical power sensors—were compared to determine which signals are most sensitive to chatter onset. The signal characteristics both in time and frequency domain were condensed into a set of chatter indicators, which were further elaborated by means of statistical basic concepts, in order to obtain a chatter identification system. Single-sensor systems and multisensor systems were compared both in terms of accuracy and robustness against malfunctions. Among single sensor systems, the cutting torque signal proved to be a superior signal for chatter identification. Multisensors systems composed of three or four sensors are the most promising solution for reliable and robust chatter identification. The best results were obtained by the multisensor system composed of the axial force sensor and accelerometers.
Dynamics of Milling; Dynamometer; Modelling
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o izdanju
155
12.03.2008.
obranjeno
Podaci o ustanovi koja je dodijelila akademski stupanj
Udine