INFLUENCE OF CUTTING PARAMETERS AND CONDITIONS ONTO SURFACE HARDNESS OF DUPLEX STAINLESS STEEL AFTER TURNING PROCESS (CROSBI ID 202885)
Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Krolczyk, Grzegorz ; Legutko, Stanislaw ; Stoić, Antun
engleski
INFLUENCE OF CUTTING PARAMETERS AND CONDITIONS ONTO SURFACE HARDNESS OF DUPLEX STAINLESS STEEL AFTER TURNING PROCESS
The aim of the study was to determine the hardness of the steel surface after the turning of duplex coated carbide tools. The study included measuring the hardness of the machined surface in the turning process of duplex stainless steel for different cutting conditions. Hardness measurements were performed for different cutting speeds and for wet and dry cutting conditions. The measurement results were compared for test cutting tools: Tl tool coated with a ceramic intermediate layer and T2 multilayer coating tool. The study was performed for the HV10 hardness and the results were statistically analysed.
cutting parameters ; Duplex Stainless Steel hardness ; machining ; turning
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o izdanju
20 (6)
2013.
1077-1080
objavljeno
1330-3651