ABRASIVE WATERJET (AWJ) TITANIUM TANGENTIAL TURNING EVALUATION (CROSBI ID 205901)
Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Hloch, S. ; Hlaváček, J. ; Vasilko, K. ; Cárach, J. ; Samardžić, ivan ; Kozak, Dražan ; Hlavatỳ, I. ; Ščučka, J. J. ; Klich ; Klichová, D.
engleski
ABRASIVE WATERJET (AWJ) TITANIUM TANGENTIAL TURNING EVALUATION
The paper deals abrasive waterjet titanium tangential turning. Titanium grade 3 with a diameter of 55 mm was used as an experimental material. Technological conditions of turning tests were the same by gradually changing value of traverse speed (vf=1, 5 ; 3 ; 4, 5 ; 6 ; 7, 5 mm*min^-1). Experiment tests were performed by using continuous abrasive waterjet of pressure p=400MPa, by rotation n=60rpm of workpiece. The abrasive particles (Barton Garnet) were fed to the waterjet in the amount of 0, 4kg*min^-1. It was determined that acceleration of traverse speed did not increase the surface profile parameters.
titanium; abrasive waterjet turning; traverse speed
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano