Circuit Modelling of Printed Circuit Boards for a DC-DC Converter Design (CROSBI ID 612646)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Blečić, Raul ; Gillon, Renaud ; Nauwelaers, Bart ; Barić, Adrijan
engleski
Circuit Modelling of Printed Circuit Boards for a DC-DC Converter Design
In this paper a SPICE-compatible distributed circuit modelling method is applied to the modelling of printed circuit boards (PCBs) typically found in a DC-DC converter design. The method consists of identifying each pair of parallel plates present in a PCB and modelling it by a two-dimensional array of lossy transmission line elements. The impedance profile of the PCB is simulated in SPICE. The simulation results of the distributed circuit model are validated by comparing them to the simulation results obtained from a commercial electromagnetic (EM) solver. The presented method enables a fast and numerically efficient design, analysis and optimization of PCBs for DC-DC converters.
SPICE-compatible model; two-dimensional array of lossy transmission line elements; irregularly shaped multi-layered boards; loop inductance; impedance profile
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
745-750.
2014.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of the International Symposium on Electromagnetic Compatibility (EMC Europe)
Institute of Electrical and Electronics Engineers (IEEE)
Podaci o skupu
International Symposium on Electromagnetic Compatibility (EMC Europe)
predavanje
01.09.2014-04.09.2014
Göteborg, Švedska