Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Modelling of the influence of creep strains on the fire response of stationary heated steel members (CROSBI ID 208473)

Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija

Torić, Neno ; Harapin, Alen ; Boko, Ivica Modelling of the influence of creep strains on the fire response of stationary heated steel members // Journal of Structural Fire Engineering, 6 (2015), 3; 155-176. doi: 10.1260/2040-2317.6.3.155

Podaci o odgovornosti

Torić, Neno ; Harapin, Alen ; Boko, Ivica

engleski

Modelling of the influence of creep strains on the fire response of stationary heated steel members

The paper presents an application of a newly developed implicit procedure for including steel creep strain into structural fire analysis through modelling a series of stationary fire tests. An implicit modelling procedure is incorporated into customized structural fire analysis software. Four stationary fire tests on simply supported, steel members were modelled using strain modified stress-stress curves. Strain modified curve was obtained by adding the creep strain directly into the steel stationary stress- strain material curve. The proposed implicit procedure in this manner attempts to create an equivalent transient stress-strain curve from the provided stationary stress-strain curve. The proposed implicit procedure was able to provide satisfactory prediction of member deflections in the temperature region of 400- 700°C.

Fire; heat transfer; finite element; steel; creep strains; stationary test

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

6 (3)

2015.

155-176

objavljeno

2040-2317

2040-2325

10.1260/2040-2317.6.3.155

Povezanost rada

Građevinarstvo

Poveznice
Indeksiranost