Low-Sensitivity, Low-Power Fourth-Order Band-Pass Active-RC Allpole Filter Using Impedance Tapering (CROSBI ID 481466)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Jurišić, Dražen ; Moschytz, George S. ; Mijat, Neven
engleski
Low-Sensitivity, Low-Power Fourth-Order Band-Pass Active-RC Allpole Filter Using Impedance Tapering
In this paper the design of low sensitivity band-pass (BP) active resistance-capacitance (RC) filters using impedance tapering is presented. 4th-order band-pass filters are considered. The design procedure for low-sensitivity low-pass (LP) prototype second-order class 4 Sallen and Key active-RC allpole filters, using impedance tapering, has already been published. In this paper a low-pass to band-pass (LP-BP) transformation is applied to an impedance tapered 2nd-order LP filter, and a 4th-order BP filter is constructed. The component values, selected for impedance tapering, account for the considerable decrease in sensitivity to component tolerances for the LP as well as for the BP filter. As an example, a Chebyshev 4th-order BP filter is realized, and the sensitivities are analysed. Schoeffler sensitivity measure is used as a basis for comparison, and Monte Carlo runs are performed as a double-check. A considerable improvement in sensitivity is achieved, both for the BP filter as well as well as for the original LP prototype.
Allpole filters; BP filters; LP-BP transformation; low-sensitivity active filters
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
815-818-x.
2001.
objavljeno
Podaci o matičnoj publikaciji
Micallef,Joseph;Maloberti,Franco
Institute of Electrical and Electronics Engineers (IEEE)
Podaci o skupu
8th International IEEE Conference on Electronics, Circuits, and Systems
predavanje
02.09.2001-05.09.2001
Imsida, Malta