Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

Ion elution of laser-welded Co-Cr denture base metal alloys (CROSBI ID 617919)

Prilog sa skupa u časopisu | sažetak izlaganja sa skupa | međunarodna recenzija

Jelinić Carek, Andreja ; Živko Babić, Jasenka ; Jakovac, Marko ; Badel, Tomislav ; Crnojević, Helena ; Bago, Ivona Ion elution of laser-welded Co-Cr denture base metal alloys // Journal of dental research. 2014

Podaci o odgovornosti

Jelinić Carek, Andreja ; Živko Babić, Jasenka ; Jakovac, Marko ; Badel, Tomislav ; Crnojević, Helena ; Bago, Ivona

engleski

Ion elution of laser-welded Co-Cr denture base metal alloys

Objective: The goal of this study was to determine the concentration of Co, Cr and Ni eluted ions from laser welds of partial denture Co-Cr alloys. Method: Preparation of three Co- Cr dental alloys (Wisil M-Austenal, Köln, Germany ; I-MG-Interdent, Celje, Slovenia ; Brealloy F-400- Bredent, Senden, Germany) was performed according to ISO 6871-1 for static immersion test. The specimens were divided into two groups. The first group of samples was welded with Nd:YAG laser (Hercules ; Interdent, Celje, Slovenia) and second, unwelded, was used as a control group. The surfaces of the patterns were measured with accuracy of 0.1 cm2. The samples were exposed to the aqueous solution (0, 1mol/l lactic acid and 0, 1 mol/l sodium chloride) for 7 days at 37±1 °C. Ions elution was electrochemical tested by atomic absorption spectroscopy. Microstructure was analyzed before and after immersion test. After immersion, the samples surfaces were analyzed by scanning electron microscope TESCAN, Vega TS5136LS (Tescan, Brno, Czech Republic) with EDS system. Result: Elution of Co and Cr ions was statistically greater from laser welds. Nickel ions were found in both solutions, despite no declaration in analyzed alloys composition. Microstructure and SEM showed no differences before and after immersion test. In laser welds the cracks were visible. EDS analyses proved ions of Co, Cr, S, Hg and Si in laser welds, and Co, Cr, Mn, Mo, Si and C in control specimens. Conclusion : Laser welds proved less corrosion resistance because of cracks obtained during welding. The results suggest the control of working parameters during the welding.

Alloys; Biocompatibility; Corrosion; Lasers and Metals

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

2014.

nije evidentirano

objavljeno

Podaci o matičnoj publikaciji

Journal of dental research

0022-0345

Podaci o skupu

IADR/PER Congress Dubrovnik, 2014

poster

10.09.2014-13.09.2014

Dubrovnik, Hrvatska

Povezanost rada

Dentalna medicina

Indeksiranost