Influence of silica nanoparticles in PCL overprint coating on the color change of offset print (CROSBI ID 618308)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Bota, Josip ; Brozović, Maja ; Hrnjak-Murgić, Zlata
engleski
Influence of silica nanoparticles in PCL overprint coating on the color change of offset print
This paper presents research on the influence of polycaprolactone (PCL) nanocomposite overprint coating on the color change of offset printed paperboard. To investigate this issue color test card was developed via spectrophotometric software and offset printed on paperboard. The color values of the printed sample were measured before and after the coating application to facilitate the measurement and comparison of the results. The coatings applied on the printed sample were three different concentrations (1%, 2% and 3%) of silica nanoparticles in PCL biopolymer. The research found a color change in all investigated samples. It is observed that adding silica nanoparticles to PCL coatings improve the color stability of the coated samples. Detailed analysis of hue (ΔH), chroma (ΔC) and lightness (ΔL) of the tested samples show that PCL coating with 2% silica nanopartices result in the least amount of color change.
Polycaprolactone; silica; nanocomposite; color change; packaging
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
225-232.
2014.
objavljeno
Podaci o matičnoj publikaciji
Proceedings - The Seventh International Symposium GRID 2014
Novaković, Dragoljub
Novi Sad: Faculty of Technical Sciences, Department of Graphic Engineering and Design
978-86-7892-647-1
Podaci o skupu
7th International Symposium on Graphic Engineering and Design GRID 2014
predavanje
13.11.2014-14.11.2014
Novi Sad, Srbija