Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

IMPROVING CALIBRATION ACCURACY BY CALIBRATION TARGET DESIGN (CROSBI ID 619779)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Donevski, Davor ; Milčić, Diana, Kunštek, Krešimir IMPROVING CALIBRATION ACCURACY BY CALIBRATION TARGET DESIGN. 2013

Podaci o odgovornosti

Donevski, Davor ; Milčić, Diana, Kunštek, Krešimir

engleski

IMPROVING CALIBRATION ACCURACY BY CALIBRATION TARGET DESIGN

In printing, as well as any other production process, machines and devices are calibrated in order to achieve predictable and repeatable results. Aligning the process parameters to specific aimed values requires tools and devices. This study investigates the drawbacks of calibration target design that can reduce calibration accuracy. The performance of P2P25Xa target used as G7 Method tool was evaluated on a laser printer. The target design was then analysed in order to determine possible sources of error. The target was then redesigned and its performance evaluated. The redesigned target showed improvements in terms of the calibration process accuracy.

printer calibration; G7 method; calibration target

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

2013.

objavljeno

Podaci o matičnoj publikaciji

Podaci o skupu

IJCELIT 2013

predavanje

20.11.2013-22.11.2013

Budimpešta, Mađarska

Povezanost rada

Grafička tehnologija