Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

Improvement of thermal performance of generator step-up transformers (CROSBI ID 215303)

Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija

Sitar, Robert ; Janić, Žarko ; Štih, Željko Improvement of thermal performance of generator step-up transformers // Applied thermal engineering, 78 (2015), 516-524. doi: 10.1016/j.applthermaleng.2014.12.052

Podaci o odgovornosti

Sitar, Robert ; Janić, Žarko ; Štih, Željko

engleski

Improvement of thermal performance of generator step-up transformers

Generator step-up transformers have high losses in structural parts due to high current leads. As distribution of magnetic field is nonuniform it may easily cause high local losses and high temperature rises. This paper studies impact of aluminum shields on losses and temperature rise. Using a 3D finite element method (FEM) software, calculations for five different leads arrangement are done on a model of a 220 MVA transformer with phase current of 4.4 kA. Influence on results of non-linear magnetic property and non-linear thermal parameters are studied as well. Finally, calculation results are verified by measurements. Experiment has confirmed that aluminum shield is a correct measure for reducing tank local overheating.

Aluminum shield; High current; Power transformer; Stray loss; Heat transfer

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

78

2015.

516-524

objavljeno

1359-4311

10.1016/j.applthermaleng.2014.12.052

Povezanost rada

Elektrotehnika

Poveznice
Indeksiranost