Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Finite Volume Implementation of the Harmonic Balance Method for Periodic Non-Linear Flows (CROSBI ID 625247)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Cvijetić, Gregor ; Jasak, Hrvoje ; Vukčević, Vuko Finite Volume Implementation of the Harmonic Balance Method for Periodic Non-Linear Flows // Proceedings of the 54th AIAA Aerospace Sciences Meeting. 2016

Podaci o odgovornosti

Cvijetić, Gregor ; Jasak, Hrvoje ; Vukčević, Vuko

engleski

Finite Volume Implementation of the Harmonic Balance Method for Periodic Non-Linear Flows

Harmonic Balance Method for non-linear periodic flows is presented in this paper. As- sumption of temporal periodicity can be used to convert harmonic transient equations into a set of coupled steady state equations. Solution of coupled equations yields flow fields at discrete instants of time throughout a representative harmonic period. The method uses second-order accurate, polyhedral Finite Volume Method. It is developed for a general transport equation and generalised to coupled non-linear equation sets, including incom- pressible Navier-Stokes equations and is implemented in OpenFOAM. Verification of the model is carried out by comparing the results with transient simulations. Preliminary re- sults for weakly and strongly harmonic incompressible flow around oscillating airfoil are presented.

Harmonic Balance Method; Non-Linear Periodic Flows; Finite Volume; OpenFOAM

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

2016.

objavljeno

Podaci o matičnoj publikaciji

Proceedings of the 54th AIAA Aerospace Sciences Meeting

978-1-62410-393-3

Podaci o skupu

54th AIAA Aerospace Sciences Meeting: AIAA SciTech

predavanje

04.01.2016-08.01.2016

San Diego (CA), Sjedinjene Američke Države

Povezanost rada

Strojarstvo

Poveznice