Numerical Model of Hydrodynamic Lubrication Process (CROSBI ID 625888)
Prilog sa skupa u zborniku | sažetak izlaganja sa skupa | međunarodna recenzija
Podaci o odgovornosti
Škurić, Vanja ; Tuković, Željko ; Jasak, Hrvoje
engleski
Numerical Model of Hydrodynamic Lubrication Process
Numerical model for calculating hydrodynamic lubrication process under the thin-film approximation is presented in this study. Hydrodynamic lubrication is obtained between two surfaces in relative motion completely separated by a cohesive film or lubricant. There are several requirements for lubrication regime to be hydrodynamic: lubricant has to be supplied in sufficient quantity, there should be no aeration or abrasive particles between surfaces, film should be thicker at the inlet than at the outlet, etc. In order to simulate hydrodynamic lubrication process the Reynolds lubrication equation is used. It is an elliptic partial differential equation which defines hydrodynamic pressure in a thin liquid film between two closely spaced moving surfaces. Finite Area Method, a surface counterpart of the Finite Volume Method, is used to discretize Reynolds lubrication equation over a curved surface mesh. Numerical model is implemented in OpenFOAM and validated by calculating hydrodynamic lubrication process in journal bearings.
Hydrodynamic Lubrication ; Finite Area Method ; Reynolds Lubrication Equation ; OpenFOAM
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
2015.
nije evidentirano
Podaci o matičnoj publikaciji
Podaci o skupu
10th OpenFOAM® Workshop
predavanje
29.06.2015-02.07.2015
Ann Arbor (MI), Sjedinjene Američke Države