DEVELOPMENT OF AN ADAPTIVE MACHINING SYSTEM FOR MICRO-DRILLING (CROSBI ID 629480)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Todić, Rajko ; Bartulović, Ante ; Novak, Ivan ; Marfat, Tomislav
engleski
DEVELOPMENT OF AN ADAPTIVE MACHINING SYSTEM FOR MICRO-DRILLING
An increase in the production of micro-components causes a need for the development of appropriate manufacturing techniques, one of which is deep-micro-hole-drilling. This paper presents the development of an adaptive machining system for deep micro hole drilling whereby adaptive control is recognized through thrust force. The drilling of 0, 5 mm diameter holes in special cast irons with up to 40:1 depth to diameter ratio is performed. Due to the problems related with micro hole drilling in respect to conventional drilling and expressive heterogeneity of workpiece materials, it is shown that the use of an adaptive control can be of significant improvement for insurance of an adequate micro drilling process.
deep micro-drilling; adaptive control; micro-drilling machine
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
235-238.
2015.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of the CIM 2015-15th International Scientific Conference on Production Engineering
Abele, Eberhard ; Udiljak, Toma ; Ciglar, Damir
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS)
978-953-7689-03-2
Podaci o skupu
15th International Scientific Conference on Production Engineering - CIM 2015
predavanje
10.06.2015-13.06.2015
Vodice, Hrvatska