Structure and properties of welded joint of high- strength wear-resistant steel NM360 (CROSBI ID 222709)
Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Gao, Zeng ; Chen, Z.R. ; Wu, Y. H. ; Niu, Jitai ; Brnić, Josip
engleski
Structure and properties of welded joint of high- strength wear-resistant steel NM360
Present research studies the structure and properties of welded joint of high-strength wear-resistant steel NM360 by means of carbon dioxide arc welding with welding material GFM- 70. The experimental result indicates that high-strength wear-resistant steel NM360 can be welded together with appropriate welding parameters. In the whole joint area, macroscopic defect such as pore, inclusion, and crack does not appear. The joint tensile strength exceeds that of welding material GFM- 70 at least 10.5%. The impact energy in each part of joint doubles that of base metal. Between the joint and base metal, there is coarse grain zone, fully recrystallized zone, incompletely recrystallized zone. The hardness in heat affected zone and near fusion line is quite large, which distributes in the range of 360~394 HV. The hardness of other area in joint is smaller than that of base metal NM360.
Wear-resistant stee ; Welded joint ; Structure ; Properties
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o izdanju
32 (4)
2016.
299-302
objavljeno
0267-0836
10.1080/02670836.2015.1126425
Povezanost rada
Brodogradnja, Strojarstvo, Temeljne tehničke znanosti