Analysis of Cu-Al-Mn shape memory alloys after casting in moulds (CROSBI ID 634381)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Gojić, Mirko ; Kožuh, Stjepan ; Ivanić, Ivana ; Holjevac Grgurić, Tamara ; Pezer, Robert ; Anžel, Ivan ; Kosec, Borut ; Bizjak, Milan ; Vrsalović, Ladislav ; Živković, Dragana
engleski
Analysis of Cu-Al-Mn shape memory alloys after casting in moulds
Shape memory alloys (SMAs) are advanced functional materials suitable for technical applications. Among them Cu-Al-Mn alloy is a promising candidate for industry applications (mechanical engineering, electro-engineering etc.) due to their ductility. In this work analysis of the Cu-Al-Mn alloy after smelting and casting in the laboratory electro-arc furnace is shown. Metallographic analysis of the alloy samples were carried out by an optical microscopy and scanning electron microscopy including energy dispersive spectroscopy. It was found that after casting two-phase microstructure occurred. Grain size of phases and hardness of alloy after smelting and casting are similar. Martensite microstructure and secondary particles are not observed.
shape memory alloys (SMAs) ; Cu-Al-Mn alloy ; microstructure
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
61-66.
2016.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of 11th Scientific-Research Symposium with International Participation Metallic and Nonmetallic Materials production - properties - application
Bušatlić, Ilhan
Zenica: Univerzitet u Zenici
978-9958-785-38-2
Podaci o skupu
Scientific-Research Symposium with International Participation "Metallic and Nonmetallic Materials production - properties - application" (11 ; 2016)
poster
21.04.2016-22.04.2016
Zenica, Bosna i Hercegovina