Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Optimization of machining parameters for turning operation with multiple quality characteristics using Grey relational analysis (CROSBI ID 227515)

Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija

Puh, Franko ; Jurkovic, Zoran ; Perinic, Mladen ; Brezocnik, Miran ; Buljan, Stipo Optimization of machining parameters for turning operation with multiple quality characteristics using Grey relational analysis // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 23 (2016), 2; 377-382. doi: 10.17559/TV-20150526131717

Podaci o odgovornosti

Puh, Franko ; Jurkovic, Zoran ; Perinic, Mladen ; Brezocnik, Miran ; Buljan, Stipo

engleski

Optimization of machining parameters for turning operation with multiple quality characteristics using Grey relational analysis

Optimization of machining processes is essential for achieving of higher productivity and high quality products in order to remain competitive. This study investigates multi-objective optimization of turning process for an optimal parametric combination to provide the minimum surface roughness (Ra) with the maximum material-removal rate (MRR) using the Grey–Based Taguchi method. Turning parameters considered are cutting speed, feed rate and depth of cut. Nine experimental runs based on Taguchi’s L9 (34) orthogonal array were performed followed by the Grey relational analysis to solve the multi-response optimization problem. Based on the Grey relational grade value, optimum levels of parameters have been identified. The significance of parameters on overall quality characteristics of the cutting process has been evaluated by the analysis of variance (ANOVA). The optimal parameter values obtained during the study have been validated by confirmation experiment.

ANOVA; Grey relational analysis; multi-objective optimization; Taguchi method; turning

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

23 (2)

2016.

377-382

objavljeno

1330-3651

10.17559/TV-20150526131717

Povezanost rada

Strojarstvo

Poveznice
Indeksiranost