Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

The referential grain size and effective porosity in the Kozeny-Carman model (CROSBI ID 228598)

Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija

Urumović, Kosta ; Urumović, Kosta The referential grain size and effective porosity in the Kozeny-Carman model // Hydrology and earth system sciences, 20 (2016), 5; 1669-1680. doi: 10.5194/hess-20-1669-2016

Podaci o odgovornosti

Urumović, Kosta ; Urumović, Kosta

engleski

The referential grain size and effective porosity in the Kozeny-Carman model

In this paper, the results of permeability and specific surface area analyses as functions of granulometric composition of various sediments (from silty clays to very well-graded gravels) are presented. The effective porosity and the referential grain size are presented as fundamental granulometric parameters expressing an effect of the forces operating on fluid movement through the saturated porous media. This paper suggests procedures for calculating referential grain size and determining effective (flow) porosity, which result in parameters that reliably determine the specific surface area and permeability. These procedures ensure the successful application of the Kozeny-Carman model up to the limits of validity of Darcy’s law. The value of effective porosity in the referential mean grain size function was calibrated within the range of 1.5 μm to 6.0 mm. The reliability of the parameters applied in the KC model was confirmed by a very high correlation between the predicted and tested hydraulic conductivity values (R²=0.99 for sandy and gravelly materials ; R²=0.70 for clayey-silty materials). The group representation of hydraulic conductivity (ranging from 10-12 m/s up to 10-2 m/s) presents a coefficient of correlation of R2=0.97 for a total of 175 samples of various deposits. These results present new developments in the research of the effective porosity, the permeability and the specific surface area distributions of porous materials. This is important because these three parameters are critical conditions for successful groundwater flow modeling and contaminant transport. Additionally, from a practical viewpoint, it is very important to identify these parameters swiftly and very accurately.

hydraulic conductivity ; effective porosity ; referential grain size

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

20 (5)

2016.

1669-1680

objavljeno

1027-5606

10.5194/hess-20-1669-2016

Povezanost rada

Rudarstvo, nafta i geološko inženjerstvo

Poveznice
Indeksiranost