Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

Influence of annealing at 900 °C on microstructure of Cu-Al-Mn shape memory ribbons (CROSBI ID 636979)

Prilog sa skupa u zborniku | stručni rad

Ivanić, Ivana ; Kožuh, Stjepan ; Bizjak, Milan ; Kosec, Borut ; Holjevac Grgurić, Tamara ; Gojić, Mirko Influence of annealing at 900 °C on microstructure of Cu-Al-Mn shape memory ribbons // Proceedings Book of ETIKUM 2016. Novi Sad: Faculty of Technical Science, 2016. str. 1-4

Podaci o odgovornosti

Ivanić, Ivana ; Kožuh, Stjepan ; Bizjak, Milan ; Kosec, Borut ; Holjevac Grgurić, Tamara ; Gojić, Mirko

engleski

Influence of annealing at 900 °C on microstructure of Cu-Al-Mn shape memory ribbons

The Cu-8.96%Al-7.08%Mn (wt.%) shape memory ribbons was casted by free jet melt spinner technique. Shape memory properties can be greatly enhanced by controlling microstructural factors such as grain size by thermomechanical treatments. In the present paper the results of the microstructural investigation in ribbons before and after heat treatment (900 °C/30'/WQ) was presented. Microstructural analysis was performed by optical microscopy (OM), scanning electron microscopy (SEM) along with EDS analysis and DSC technique. It was found a two- phase (martensite+α) structure in ribbons in as- cast state. Also, the martensite microstructure with sporadicaly α phase particles was observed in heat treated state alloy.

shape memory alloy ; CuAlMn ; microstructure ; martensite ; heat treatment

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

1-4.

2016.

nije evidentirano

objavljeno

978-86-7892-825-3

Podaci o matičnoj publikaciji

Proceedings Book of ETIKUM 2016

Novi Sad: Faculty of Technical Science

Podaci o skupu

ETIKUM 2016

predavanje

23.06.2016-25.06.2016

Novi Sad, Srbija

Povezanost rada

Kemijsko inženjerstvo, Metalurgija