Electrothermal Actuation of MEMS Resonator Based Filters with Piezoelectric Sensing (CROSBI ID 638510)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Sviličić, Boris ; Mastropaolo, Enrico ; Cheung, Rebecca
engleski
Electrothermal Actuation of MEMS Resonator Based Filters with Piezoelectric Sensing
In this work, we investigate on electrothermal actuator design solutions for optimizing frequency tuning range and Q-factor of the devices. Devices of two types were fabricated, with the only difference in the electrothermal actuator layout design, slab and u- shape layout, while other technological parameters and dimensions are the same (Fig. 1). Tested devices were taken from the same die and tested by performing two-port transmission frequency response measurements. The devices operate between 0.75 and 1.2 MHz for tuning voltages of 1 to 7 V, and Q-factors up to ~400 have been measured in atmospheric conditions. Experimental results have shown that the device actuated with u-shape electrode resonates at lower frequencies with higher Q-factor, and that wider frequency tuning has been obtained under the same actuating conditions.
MEMS resonator; Tunable filter; Electrothermal actuation; Piezoelectric sensing
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
2016.
objavljeno
Podaci o matičnoj publikaciji
37th Progress in Electromagnetics Research Symposium - PIERS 2016
Shanghai:
Podaci o skupu
Progress in Electromagnetics Research Symposium - PIERS 2016
poster
08.08.2016-11.08.2016
Šangaj, Kina