Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

A numerical model of a prestressed concrete girder (CROSBI ID 57290)

Prilog u knjizi | izvorni znanstveni rad

Galić, Mirela ; Marović, Pavao ; Ravlić, Ivan A numerical model of a prestressed concrete girder // High Performance and Optimum Design of Structures and Materials II / Hernandez ; s. ; Brebbia, Carlos et al. (ur.). Southampton: Wessex Institute of Technology Press, 2016. str. 115-127

Podaci o odgovornosti

Galić, Mirela ; Marović, Pavao ; Ravlić, Ivan

engleski

A numerical model of a prestressed concrete girder

The paper briefly describes a three-dimensional (3D) numerical model for describing non-linear behaviour of prestressed concrete structures. A computational analysis of reinforced and prestressed concrete structures requires a realistic material model and an accurate description of the geometry of reinforcement, prestressed tendons and concrete in order to predict their behaviour and evaluate the safety levels of the design. The definition of this kind of model requires a good mathematical formulation and numerical interpretation, which is shown in this paper. The non-linear behaviour of concrete is described by an elasto-plastic material model based on the modified Mohr-Coulomb law for dominant compression stresses and the modified Rankine law for dominant tensile stresses. A multi- surface presentation of the model is implemented, thus permitting a rapid convergence of the mathematical procedure. The model accounts for the triaxial, non-linear behaviour of concrete and includes all dominant effects on concrete such as yielding in compression, cracking in tension, softening and hardening. The model is defined by elementary material parameters (Young’s modulus, Poisson’s coefficient, maximal uniaxial tensile and compression stresses, coefficient of tensile correction, maximal tensile and maximal compression strains). The non-linear behaviour of prestressed tendons is described by a one- dimensional (1D) elasto-viscoplastic model. The tendon element geometry is described by a second order space function which is determined by its projections. These elements allow the modelling of arbitrarily curved prestressing tendons in space, thus they can be determined independently of a 3D finite element concrete mesh. This is particularly important for the space curvature of prestressed tendons. Some possibilities of the model are illustrated by a practical example and the obtained results are compared with the known numerical and experimental ones.

numerical modelling, prestressed concrete structures, prestressed tendon, non-linear behaviour, reinforcement

Ovo je elektronsko izdanje navedene knjige.

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

115-127.

objavljeno

Podaci o knjizi

High Performance and Optimum Design of Structures and Materials II

Hernandez ; s. ; Brebbia, Carlos ; de Wilde, P.

Southampton: Wessex Institute of Technology Press

2016.

978-1-78466-144-1

Povezanost rada

Građevinarstvo, Temeljne tehničke znanosti