Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Properties that characterize the material X46Cr13 steel (CROSBI ID 643851)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Brnić, Josip ; Kršćanski, Sanjin ; Brčić, Marino ; Niu, Jitai Properties that characterize the material X46Cr13 steel // PROCEEDINGS OF THE 8TH INTERNATIONAL CONFERENCE ON PHYSICAL AND NUMERICAL SIMULATION OF MATERIALS PROCESSING / Zeng, Jianmin ; Sun, Dongke ; Han, Qingyou (ur.). Seattle (WA): Purdue University Press, 2016

Podaci o odgovornosti

Brnić, Josip ; Kršćanski, Sanjin ; Brčić, Marino ; Niu, Jitai

engleski

Properties that characterize the material X46Cr13 steel

One of the most important issue in engineering design is the knowledge about the material to be used. In this sense, this study deals with the determination of material properties of investigated material X46Cr13. Ultimate tensile strength, yield strength, modulus of elasticity as well as creep behavior were determined using material testing machine. Results are presented in the form of engineering stress-strain curves and creep curves. On the basis of experimentally obtained results it is evident that this steel possess acceptable – high values of material properties but it cannot be tread as enough creep resistant. Although it is not presented in this study, this material is also tested to fatigue and Charpy impact energy was tested too.

Mechanical properties; Short-time creep; Fatigue; X46Cr13 steel

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

2016.

objavljeno

Podaci o matičnoj publikaciji

PROCEEDINGS OF THE 8TH INTERNATIONAL CONFERENCE ON PHYSICAL AND NUMERICAL SIMULATION OF MATERIALS PROCESSING

Zeng, Jianmin ; Sun, Dongke ; Han, Qingyou

Seattle (WA): Purdue University Press

978-1-62671-076-4

Podaci o skupu

8TH INTERNATIONAL CONFERENCE ON PHYSICAL AND NUMERICAL SIMULATION OF MATERIALS PROCESSING

ostalo

14.10.2016-17.10.2016

Seattle (WA), Sjedinjene Američke Države

Povezanost rada

Brodogradnja, Strojarstvo, Temeljne tehničke znanosti