Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Influence of the printing plate quality on image reproduction in screen printing (CROSBI ID 647574)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Mahović Poljaček, Sanja ; Tomašegović, Tamara ; Gordan Vugrek Influence of the printing plate quality on image reproduction in screen printing // Proceedings of XI Conference of Chemists, Technologists and Environmentalists of Republic of Srpska / Vukić Ljiljana (ur.). Teslić: University of Banjaluka , Faculty of Technology, 2016. str. 539-546

Podaci o odgovornosti

Mahović Poljaček, Sanja ; Tomašegović, Tamara ; Gordan Vugrek

engleski

Influence of the printing plate quality on image reproduction in screen printing

Screen printing is a reproduction technique used in wide application ranges ; from artistic reproduction to industrial sector. It can be used for transferring of the printing inks on different substrates and for transferring different technical coatings. It is a process in which the printing ink is transferred through a screen printing stencil (printing plate) on the printing substrate. The quality of reproduced image depends on number of factors, i.e. the fineness of the screen, the diameter of the screen threads ; type of weaving, mesh openings and the percentage of open area between weaved threads. Nevertheless, by considering the fact that printing stencil should be made by exposure of emulsion layer applied on the screen mesh, the colour of the mesh has the significant influence on the quality of reproduction of very detailed images. In this paper the quality of reproduced images has been evaluated by modification of exposure times of emulsion layer and by changing the colour of the mesh. The white and the yellow mesh have been used. Other parameters in the printing plate production process have been constant. The quality of reproduced images has been evaluated by measuring of surface coverage of defined fields on the printing plate as well as by measuring the dimensions of image elements. Microscopic evaluation has been made as well. The results have shown the influence of the mesh colour, emulsion layer thickness and different exposure times on deformations of image elements. These results can be used for defining the recommendation parameters in the printing plate procedure for reproduction of fine illustrations and images.

printing plate ; exposure ; mesh colour ; reproduction quality

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

539-546.

2016.

nije evidentirano

objavljeno

978-99938-54-67-8

Podaci o matičnoj publikaciji

Proceedings of XI Conference of Chemists, Technologists and Environmentalists of Republic of Srpska

Vukić Ljiljana

Teslić: University of Banjaluka , Faculty of Technology

Podaci o skupu

XI Conference of Chemists, Technologists and Environmentalists of Republic of Srpska

poster

18.11.2016-19.11.2016

Teslić, Bosna i Hercegovina

Povezanost rada

Grafička tehnologija