Calculation of the cavity wall thickness in molds for injection molding of plastomers (CROSBI ID 659146)
Prilog sa skupa u zborniku | stručni rad | međunarodna recenzija
Podaci o odgovornosti
Čatić, Igor ; Šercer, Mladen ; Štimac, Anton ; Zorić, Jurica
engleski
Calculation of the cavity wall thickness in molds for injection molding of plastomers
This paper is concerned with the optimization of mold cavity-wall thickness as a component part of the calculation of heat exchange in molds for injection molding of plastomers. The described process of thickness-defining satisfies many demands which were defined by numerous authors in their work. By making of optimizing-algorithm special attention was paid to practically proved theoretical experiences. Firstly, it is desirable that heat exchange channels be as far as possible from the mold cavity-wall surface in touch with melt. Secondly, molds are as a rule composed of metals which are, for two orders of magnitude, better heat conductors than the plastomers which the molding is made from.
Heat transfer, Mathematical techniques, Optimization, plastic injection molding, Product design, wall thickness
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
592-594.
1980.
objavljeno
Podaci o matičnoj publikaciji
Annual Technical Conference, 38th, Plastic Progress Through Process ; 1980
Podaci o skupu
Annual Technical Conference, 38th, Plastic Progress Through Process ; 1980
predavanje
05.05.1980-08.05.1980
Sjedinjene Američke Države