Distribution of stress in deformation zone of niobium microalloyed steel (CROSBI ID 250402)
Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Jandrlić, Ivan ; Rešković, Stoja ; Brlić, Tin
engleski
Distribution of stress in deformation zone of niobium microalloyed steel
Microalloyed steels today represent a significant part of total world production and processing of steel. Although widely used, there are scarce data on the stress distribution in the deformation zone of these steels. The research was carried out on two steel grades, both low-carbon structural steels with the same basic chemical composition, with one of them, additionally microalloyed with niobium. Differences in the stress distribution in the deformation zone between two tested steels were continuously observed and measured using the methods of digital image correlation and thermography. It has been found out that niobium microalloyed steel has significantly more complex material flow and stress distribution in the deformation zone when compared to the plain low carbon steel.
microalloyed steel ; plastic deformation ; thermography ; stress ; deformation zone
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o izdanju
24 (4)
2018.
746-751
objavljeno
1598-9623
2005-4149
10.1007/s12540-018-0099-2