Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Some circular saw cutting consideration (CROSBI ID 486041)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Goglia, Vlado ; Đukić, Igor Some circular saw cutting consideration // Technologies of wood processing / Trebula, Pavel ; Klement, Ivan (ur.). Zvolen: Tehničko Sveučilište u Zvolenu (TUZ), 2002. str. 73-79-x

Podaci o odgovornosti

Goglia, Vlado ; Đukić, Igor

engleski

Some circular saw cutting consideration

The paper deals with the measurement results of cutting forces on a circular saw. Circular saw blade diameter, cutting height and workpiece material were the same during measurements. The influence of the circular saw blade position on cutting efficiency was investigated. The saw blade diameter was 300 mm, cutting height 12 mm and the workpiece material was fir. The saw blade position has been changed so that the distance between the work piece surface and the tangent to the saw blade ranged from 74 to 2 mm. The cutting forces were measured in both, the horizontal and the vertical direction.

circular saw; cutting height; specific cutting energy

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

73-79-x.

2002.

nije evidentirano

objavljeno

Podaci o matičnoj publikaciji

Technologies of wood processing

Trebula, Pavel ; Klement, Ivan

Zvolen: Tehničko Sveučilište u Zvolenu (TUZ)

Podaci o skupu

Technologies of wood processing

predavanje

10.09.2002-11.09.2002

Zvolen, Slovačka

Povezanost rada

Strojarstvo, Šumarstvo, Biotehnologija