The influence of pH and electrolyte temperature on corrosion behaviour of CuAlMnTi alloy ribbons in NaCl solution (CROSBI ID 666327)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Vrsalović, Ladislav ; Jerčić, Radosna ; Gudić, Senka ; Ivanić, Ivana ; Kožuh, Stjepan ; Kosec, Borut ; Bizjak, Milan ; Gojić, Mirko
engleski
The influence of pH and electrolyte temperature on corrosion behaviour of CuAlMnTi alloy ribbons in NaCl solution
The influence of pH and temperature of 0.9% NaCl solution on corrosion behavior of CuAlMnTi alloy ribbons, produced by rapid solidification using melt spinning method, were investigated by electrochemical methods. Open circuit potential measurement, linear and potentiodynamic polarization were employed during the investigation, and the measurements were conducted in the electrolyte temperature of 10, 24, 37 and 50 oC and in solution pH of 7.4, 5.4 and 3.4. In has been found that corrosion rate generally increase with increasing the temperature of the electrolyte while the influence of pH change on CuAlNiTi ribbon corrosion is little less pronounced. After polarization measurements CuAlNiTi ribbon surfaces were investigated with light microscope and with SEM/EDS analysis.
CuAlMnTi alloy ; NaCl solution ; corrosion ; polarization ; SEM/EDS ;
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
193-198.
2018.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of 8th International Conference Mechanical Technologies and Structural Materials 2018
Jozić, Sonja ; Gjeldum, Nikola
Split: Hrvatsko društvo za zaštitu materijala (HDZaMa)
1847-7917
Podaci o skupu
8th International Conference: Mechanical Technologies and Structural Materials (MTSM 2018)
predavanje
27.09.2018-28.09.2018
Split, Hrvatska