Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

Formation of Built-Up Layer on the Tool in Turning Operation of Magnesium Alloys (CROSBI ID 255538)

Prilog u časopisu | pregledni rad (znanstveni) | međunarodna recenzija

Tomac, Nikola ; Sørby, Knut ; Doboviček, Sandro Formation of Built-Up Layer on the Tool in Turning Operation of Magnesium Alloys // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 25 (2018), 3; 940-943

Podaci o odgovornosti

Tomac, Nikola ; Sørby, Knut ; Doboviček, Sandro

engleski

Formation of Built-Up Layer on the Tool in Turning Operation of Magnesium Alloys

The present work highlights some factors which affect formation of a protective built-up layer (BUL) on the rake face of the cutting tool when cutting magnesium alloys. This work suggests that BUL can positively affect tool life, surface roughness, cutting speed and tool forces. The BUL is formed in cutting magnesium alloys with the PCD tool inserts at cutting speed range from 500 to 2500 m/min and at the carbide tool inserts at lower cutting speed range around 550 m/min. It has been found that deposit layers primarily have similar chemical composition as MnAl inclusions which are incorporated in the structure of the examined AZ91 magnesium alloys.

built-up layer ; machining ; magnesium

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

25 (3)

2018.

940-943

objavljeno

1330-3651

1848-6339

Povezanost rada

Strojarstvo

Poveznice
Indeksiranost