Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

Grey balance metamerism of the Digital Printing Techniques Dependent on the Patch Size Observation (CROSBI ID 498370)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Zjakić, Igor ; Bolanča, Stanislav ; Mrvac, Nikola Grey balance metamerism of the Digital Printing Techniques Dependent on the Patch Size Observation // 14th DAAAM International Symposium Annals of Daaam International 2003 / Katalinic, Branko (ur.). Beč: DAAAM International Vienna, 2003. str. 513-514-x

Podaci o odgovornosti

Zjakić, Igor ; Bolanča, Stanislav ; Mrvac, Nikola

engleski

Grey balance metamerism of the Digital Printing Techniques Dependent on the Patch Size Observation

The research of the metamerism was performed by measuring the integral colour density of the grey patch on different printing substrates, printed by different techniques. The print measurements were performed at A , C, D50, D65, F2, F7 and F11 illumination sources and were performed under 20 and 100 wiewing angles. The measuring results show the appearance of metamerism between the grey balance patches and the screen value of black colour. The prints were obtained by printing on the smooth and on the rough printing materials for fine art printing. They were made on conventional offset printing machine, on digital printing machine with the transferrable electrostatic belt which uses powder toner and by the digital printing technique with the liquid ink.

metamerism; colorimetry; printing; paper

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

513-514-x.

2003.

objavljeno

Podaci o matičnoj publikaciji

14th DAAAM International Symposium Annals of Daaam International 2003

Katalinic, Branko

Beč: DAAAM International Vienna

Podaci o skupu

Inteligent Manufacturing & Automation: Focus on Reconstruction and Development

predavanje

22.10.2003-25.10.2003

Sarajevo, Bosna i Hercegovina

Povezanost rada

Grafička tehnologija