crta
Hrvatska znanstvena Sekcija img
bibliografija
3 gif
 Naslovna
 O projektu
 FAQ
 Kontakt
4 gif
Pregledavanje radova
Jednostavno pretraživanje
Napredno pretraživanje
Skupni podaci
Upis novih radova
Upute
Ispravci prijavljenih radova
Ostale bibliografije
Slični projekti
 Bibliografske baze podataka

Pregled bibliografske jedinice broj: 203637

Zbornik radova

Autori: Pribanić, Tomislav; Sturm, Peter; Cifrek, Mario
Naslov: A Practical Way to Initialize Camera Parameters using the Absolute Conic
( A Practical Way to Initialize Camera Parameters using the Absolute Conic )
Izvornik: Proceedings of the Fifth IASTED International Conference on VISUALIZATION, IMAGING, AND IMAGE PROCESSING / J.J. Villanueva (ur.). - Zurich : ACTA Press , 2005. 144-149.
Skup: Fifth IASTED International Conference on VISUALIZATION, IMAGING, AND IMAGE PROCESSING
Mjesto i datum: Benidorm, Španjolska, 7-9.09.2005.
Ključne riječi: camera calibration; absolute conic
( camera calibration; absolute conic )
Sažetak:
A very common and effective approach for 3D reconstruction is a camera based system where 3D information is extracted from images. Different systems involve different camera calibration methods/tools. Characteristically for many systems is to calibrate the cameras using a single wand of known length. As integral part of the calibration procedure, initial camera parameters are commonly computed by putting and imaging two or three orthogonal wands inside the working volume. This is usually followed by the second step: sweeping the working volume with a single wand of known length. This paper presents two alternative ways of initializing camera parameters using essentially the same calibration tools (orthogonal wands), however by sweeping the volume with an orthogonal pair or triad of wands instead of a single one. The proposed methods exploit the orthogonality of the used wands and familiar linear constraints to calculate the image of the so-called absolute conic (IAC). Extracted internal parameters values from IAC are closer to the refined ones, assuring faster and safer convergence. Even without refinement, sometimes not necessary, reconstruction results using our initial sets are better than using commonly obtained initial values. Besides, the entire calibration procedure is shortened since the usual two calibration steps become one.
Vrsta sudjelovanja: Predavanje
Vrsta prezentacije u zborniku: Cjeloviti rad (više od 1500 riječi)
Vrsta recenzije: Međunarodna recenzija
Projekt / tema: 0036007
Izvorni jezik: eng
Kategorija: Znanstveni
Znanstvena područja:
Elektrotehnika,Računarstvo,Kliničke medicinske znanosti



Verzija za printanje   za tiskati


upomoc
foot_4