Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

MATHEMATICAL MODELLING OF CUTTING FORCES IN THE LONGITUDINAL TURNING PROCESS (CROSBI ID 510196)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Cebalo, Roko ; Bajić, Dražen ; Bilić, Boženko MATHEMATICAL MODELLING OF CUTTING FORCES IN THE LONGITUDINAL TURNING PROCESS // 10th International Scientific Conference on Production Engineering / Cebalo, Roko ; Schulz, Herbert (ur.). Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 2005. str. I31-I40

Podaci o odgovornosti

Cebalo, Roko ; Bajić, Dražen ; Bilić, Boženko

engleski

MATHEMATICAL MODELLING OF CUTTING FORCES IN THE LONGITUDINAL TURNING PROCESS

Cutting forces are one of the most basic productivity features and as such represent important criteria in the optimization and control of a cutting process. This paper deals with the influence analysis of cutting parameters (cutting speed, depth and feed) on the cutting forces for the case of longitudinal turning. Second order central composite experimental design was used for the analysis and mathematical modeling. The outputs from the mathematical model were compared with the outputs resulting from the use of Kienzl’ s tangential cutting force equation.

cutting parameters; longitudinal turning; cutting forces

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

I31-I40.

2005.

objavljeno

Podaci o matičnoj publikaciji

10th International Scientific Conference on Production Engineering

Cebalo, Roko ; Schulz, Herbert

Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS)

953-97181-6-3

Podaci o skupu

Computer Integrated Manufacturing and High Speed Machining

predavanje

15.06.2005-17.06.2005

Lumbarda, Hrvatska

Povezanost rada

Strojarstvo