Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

The Influence of the Loading Rate on the Mechanical Properties of Drawing Steel Sheet (CROSBI ID 126245)

Prilog u časopisu | prethodno priopćenje

Buršak, Marian ; Mamuzić, Ilija The Influence of the Loading Rate on the Mechanical Properties of Drawing Steel Sheet // Metalurgija, 45 (2006), 1; 57-60-x

Podaci o odgovornosti

Buršak, Marian ; Mamuzić, Ilija

engleski

The Influence of the Loading Rate on the Mechanical Properties of Drawing Steel Sheet

The paper analyzes the infl uence of the loading rate in the interval from 1 to 1000 mm/min on the mechanical properties of drawing steel sheet H260LAD with the gauge of 1 mm, used for the manufacture of automotive parts, under tension and bending conditions. It describes the aspects of material characteristics under tension and bending conditions, while bending tests were made on notched specimens (a modified impact bending test). The paper presents knowledge that using a modified notch toughness test it is possible to achieve the pressability (formability) characteristics corresponding to dynamic strain rates even under the static loading.

steel strip; drawing; tension; bending; strain rate

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

45 (1)

2006.

57-60-x

objavljeno

0543-5846

Povezanost rada

Metalurgija

Indeksiranost