The influence of the loading rate on the mechanical properties of drawing steel sheet (CROSBI ID 539457)
Prilog sa skupa u časopisu | sažetak izlaganja sa skupa | međunarodna recenzija
Podaci o odgovornosti
Buršák, M. ; Mamuzić, Ilija
engleski
The influence of the loading rate on the mechanical properties of drawing steel sheet
The paper analyzes the influence of the loading rate in the interval from 1 to 1000 mm/min on the mechanical properties of drawing steel sheet H260LAD with the gauge of 1 mm, used for the manufacture of automotive parts, under tension and bending conditions. It describes the aspects of material characteristics under tension and bending conditions, while bending tests were made on notched specimens (a modified impact bending test). The paper presents knowledge that using a modified notch toughness test it is possible to achieve the pressability (formability) characteristics corresponding to dynamic strain rates ever under the static loading.
drawing steel sheet
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
2008.
nije evidentirano
objavljeno
Podaci o matičnoj publikaciji
Podaci o skupu
Međunarodni simpozij Hrvatskog metalurškog društva "Materijali i metalurgija" (8 ; 2008)
poster
22.06.2008-26.06.2008
Šibenik, Hrvatska