crta
Hrvatska znanstvena Sekcija img
bibliografija
3 gif
 Naslovna
 O projektu
 FAQ
 Kontakt
4 gif
Pregledavanje radova
Jednostavno pretraživanje
Napredno pretraživanje
Skupni podaci
Upis novih radova
Upute
Ispravci prijavljenih radova
Ostale bibliografije
Slični projekti
 Bibliografske baze podataka

Pregled bibliografske jedinice broj: 423953

Zbornik radova

Autori: Ćurčija, D.; Mamuzić, Ilija; Buršak, M.
Naslov: Modeliranje mazivoga sloja kod dresiranja trake
( Modelling the lubricant layer at strip dressing )
Izvornik: MATRIB 2009 / Grilec, Krešimir ; Marić, Gojko (ur.). - Zagreb : Hrvatsko društvo za materijale i tribologiju , 2009. 1-12 (ISBN: 978-953-7040-15-4).
Skup: 14. Conference on Materials, Processes, Friction and Wear - MATRIB 2009
Mjesto i datum: Vela Luka, Hrvatska, 14.-26.06.2009.
Ključne riječi: hrapavost površine; emulzije; Reynoldsova diferencijalna jednadžba; Monte-Carlo metoda; točke motrišta Auto-CAD-a
( rougness of surface; emulsions; Reynolds' differential equation; Monte-Carlo method; Auto-CAD points of view; Fourier lines )
Sažetak:
What is analysed is influence of diagonal roughness of the strip on dressing processeswith lubricants. The analysis begins with Reynolds differential equation for lubricating, in which diagonal roughness of the strip is incorporated. In the estimation, the height of lubricant on the strip is taken into account, as well as its influence on the height of lubricant at the inlet section of the deformation zone. The research has shown that diagonal roughness has a twofold influence on the height of lubricant at the inlet section of the deformation zone. For small roughness of the strip the height of lubricant layer has a tendency of slight decreasing related to the nominal height (when the process is described by smoothness of surfacess) but with an increase of roughness, the thickness of lubricant layer increases further to. The nominal height of lubricant is considered to be the case of changing the concave surface into the convex one, which seems to look straight as if the process is described by smoothness of surfaces. The basis of the analysis was the Monte-Carlo numerical method, and an approximate analytical solution, that gave good coinciding in comparison with the numerical method, was carried out.
Vrsta sudjelovanja: Predavanje
Vrsta prezentacije u zborniku: Cjeloviti rad (više od 1500 riječi)
Vrsta recenzije: Međunarodna recenzija
Projekt / tema: 120-1201787-1491, 124-1241565-1537
Izvorni jezik: eng
Kategorija: Znanstveni
Znanstvena područja:
Metalurgija
Upisao u CROSBI: ilmamuzi@public.hr (ilmamuzi@public.hr), 22. Srp. 2009. u 19:44 sati



Verzija za printanje   za tiskati


upomoc
foot_4