Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

Office Print-Outs in the Production of Recycled Food Packaging Paper (CROSBI ID 591273)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Jamnicki, Sonja ; Majnarić, Igor ; Bolanča Mirković, Ivana Office Print-Outs in the Production of Recycled Food Packaging Paper // Annals of DAAAM for ... & proceedings of the ... International DAAAM Symposium ... / Katalinić, Branko (ur.). 2012. str. 703-706

Podaci o odgovornosti

Jamnicki, Sonja ; Majnarić, Igor ; Bolanča Mirković, Ivana

engleski

Office Print-Outs in the Production of Recycled Food Packaging Paper

The possibility of using recovered office paper grades as alternative raw material in the manufacture of white top plies of food packaging linerboards is a major area of investigation. Three different types of office print-outs had been submitted to a chemical deinking flotation and the handsheets formed after each deinking flotation trial were analyzed on the presence of residual chemical contaminants: heavy metals (Cd, Pb, Hg), primary aromatic amines, phthalates, diisopropylnaphthalenes (DIPN) and polychlorinated biphenyls (PCB). Moreover, bleed fastness of fluorescent whitened agents (FWA) was determined as well. The conducted research showed that of all analyzed contaminants in the deinked pulp handsheets, only phthalates were detected, in concentrations from 5.3 up to 12.5 mg/kg of paper. However, according to present toxicological assessments, these amounts of detected phthalates do not impose a health risk to the consumers. Research thus demonstrated that all tested papers regarding the analyses done within this study are proved suitable to be used in direct contact with food.

office print-outs; deinking flotation; white top linerboards; food packaging; chemical contaminants

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

703-706.

2012.

objavljeno

Podaci o matičnoj publikaciji

Annals of DAAAM for 2012 & Proceedings of the 23rd International DAAAM Symposium. 23 (2012) (1)

Katalinić, Branko

Beč: DAAAM International Vienna

978-3-901509-91-9

2304-1382

Podaci o skupu

23rd DAAAM International Symposium on Intelligent Manufacturing and Automation

poster

24.10.2012-27.10.2012

Zadar, Hrvatska

Povezanost rada

Grafička tehnologija